Endress+Hauser Proline Promag 300 - Display Channel 3; Display Channel 4

Description of device parameters Proline Promag 300 Modbus RS485
198 Endress+Hauser
Description See the Display channel 1 parameter →  197
"Displ.channel 3" submenu
Navigation  Expert → Diagnostics → Data logging → Displ.channel 3
▸ Displ.channel 3
Display channel 3
→  198
Display channel 3
Navigation  Expert → Diagnostics → Data logging → Displ.channel 3
Prerequisite A process variable is defined in the Assign chan. 3 parameter.
Description See the Display channel 1 parameter →  197
"Displ.channel 4" submenu
Navigation  Expert → Diagnostics → Data logging → Displ.channel 4
▸ Displ.channel 4
Display channel 4
→  198
Display channel 4
Navigation  Expert → Diagnostics → Data logging → Displ.channel 4
Prerequisite A process variable is defined in the Assign chan. 4 parameter.
Description See the Display channel 1 parameter →  197