Endress+Hauser Proline Promag 300 - Separator

Proline Promag 300 Modbus RS485 Description of device parameters
Endress+Hauser 27
1
XXXXXXXXX
A0029422
1 Position of the header text on the display
User entry
The number of characters displayed depends on the characters used.
Separator 
Navigation  Expert → System → Display → Separator (0101)
Prerequisite A local display is provided.
Description Use this function to select the decimal separator.
Selection • . (point)
• , (comma)
Factory setting . (point)
Contrast display
Navigation  Expert → System → Display → Contrast display (0105)
Prerequisite A local display is provided.
Description Use this function to enter a value to adapt the display contrast to the ambient conditions
(e.g. the lighting or viewing angle).
User entry 20 to 80 %
Factory setting Depends on the display