EasyManua.ls Logo

Endress+Hauser Proline Promag 300 - Sensor Submenu

Endress+Hauser Proline Promag 300
272 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Proline Promag 300 Modbus RS485 Modbus RS485 Register Information
Endress+Hauser 237
"Def. access code" wizard
Navigation: Expert → System → Administration → Def. access code
Parameter Register Data type Access Selection / User entry / User interface → 
Def. access code 8677 to 8684 String Read / Write Max. 16-digit character string
comprising numbers, letters and special
characters
40
Confirm code 8685 to 8692 String Read / Write Max. 16-digit character string
comprising numbers, letters and special
characters
41
"Reset acc. code" submenu
Navigation: Expert → System → Administration → Reset acc. code
Parameter Register Data type Access Selection / User entry / User interface → 
Operating time (0652) 2631 Integer Read Days (d), hours (h), minutes (m) and
seconds (s)
41
Reset acc. code (0024) 8880 to 8895 String Read / Write Character string comprising numbers,
letters and special characters
41
6.3.2 "Sensor" submenu
"Measured val." submenu
"Process variab." submenu
Navigation: Expert → Sensor → Measured val. → Process variab.
Parameter Register Data type Access Selection / User entry / User interface → 
Volume flow (1838) 3874 to 3875 Float Read Signed floating-point number 45
Mass flow (1847) 3876 to 3877 Float Read Signed floating-point number 45
Conductivity (1850) 2013 to 2014 Float Read Signed floating-point number 46
Correct.vol.flow (1851) 2011 to 2012 Float Read Signed floating-point number 46
Temperature (1852) 2015 to 2016 Float Read Positive floating-point number 47
CorrConductivity (1853) 3977 to 3978 Float Read Positive floating-point number 47
"Totalizer" submenu
Navigation: Expert → Sensor → Measured val. → Totalizer
Parameter Register Data type Access Selection / User entry / User interface → 
Totalizer val. 1 to n (0911–1 to n) 1: 2610 to 2611
2: 2810 to 2811
3: 3010 to 3011
Float Read Signed floating-point number 48
Tot. overflow 1 to n (0910–1 to n) 1: 2612 to 2613
2: 2812 to 2813
3: 3012 to 3013
Float Read Integer with sign 48

Table of Contents

Other manuals for Endress+Hauser Proline Promag 300

Related product manuals