Endress+Hauser Proline Promag 300 - Measured Val. 1 to N; Measur. Curr. 1 to N; Val.stat.inp.

Description of device parameters Proline Promag 300 Modbus RS485
50 Endress+Hauser
Measured val. 1 to n
Navigation  Expert → Sensor → Measured val. → Input values → Current input 1 to n
→ Measured val. 1 to n (1603–1 to n)
Description Displays the current input value.
User interface Signed floating-point number
Measur. curr. 1 to n
Navigation  Expert → Sensor → Measured val. → Input values → Current input 1 to n → Measur.
curr. 1 to n (1604–1 to n)
Description Displays the current value of the current input.
User interface 0 to 22.5 mA
"Value status input 1 to n" submenu
Navigation  Expert → Sensor → Measured val. → Input values → Val.stat.inp.
1 to n
‣
Val.stat.inp. 1 to n
Val.stat.inp. (1353–1 to n)
→  50
Val.stat.inp.
Navigation  Expert → Sensor → Measured val. → Input values → Val.stat.inp. 1 to n
→ Val.stat.inp. (1353–1 to n)
Description Displays the current input signal level.
User interface • High
• Low