Endress+Hauser Proline Promag 300 - Heartbeat Submenu; Simulation Submenu

Proline Promag 300 Modbus RS485 Description of device parameters
Endress+Hauser 201
Maximum value
Navigation  Expert → Diagnostics → Min/max val. → Temperature → Maximum value (6680)
Prerequisite One of the following conditions is met:
• Order code for "Sensor option", option CI "Medium temperature measurement"
or
• The temperature is read into the flowmeter from an external device.
Description Displays the highest previously measured medium temperature value.
User interface Signed floating-point number
Additional information Dependency
The unit is taken from the Temperature unit parameter (→  58)
3.8.13 "Heartbeat" submenu
For detailed information on the parameter descriptions for the Heartbeat
Verification+Monitoringapplication package, refer to the Special Documentation for
the device →  7
Navigation  Expert → Diagnostics → Heartbeat
‣
Heartbeat
‣
Base settings
‣
Perform.verific.
‣
Verific. results
‣
Monitor. results
3.8.14 "Simulation" submenu
Navigation  Expert → Diagnostics → Simulation
‣
Simulation
Assign proc.var. (1810)
→  202
Proc. var. value (1811)
→  203
Status inp. sim. (1355)
→  203