Endress+Hauser Proline Promag 300 - Bus Address; Modbus Config. Submenu

Description of device parameters Proline Promag 300 Modbus RS485
150 Endress+Hauser
‣
Modbus info
→  155
‣
Modbus data map
→  156
‣
Web server
→  156
‣
WLAN settings
→  159
3.6.1 "Modbus config." submenu
Navigation  Expert → Communication → Modbus config.
‣
Modbus config.
Bus address (7112)
→  150
Baudrate (7111)
→  151
Data trans. mode (7115)
→  151
Parity (7122)
→  151
Byte order (7113)
→  152
Telegram delay (7146)
→  153
Failure mode (7116)
→  153
Bus termination (7155)
→  154
Fieldb.writ.acc. (7156)
→  154
Bus address 
Navigation  Expert → Communication → Modbus config. → Bus address (7112)
Description For entering the device address.
User entry 1 to 247
Factory setting 247