Endress+Hauser Proline Promag 300 - Volume Text

Proline Promag 300 Modbus RS485 Description of device parameters
Endress+Hauser 63
Spec. enth. text (0585)
→  67
Spec. enth. off. (0584)
→  68
Spec. enth. fac. (0583)
→  68
Energy text (0600)
→  68
Energy offset (0599)
→  69
Energy factor (0586)
→  69
Pressure text (0581)
→  69
Pressure offset (0580)
→  70
Pressure factor (0579)
→  70
Volume text 
Navigation  Expert → Sensor → System units → User-spec. units → Volume text (0567)
Description Use this function to enter a text for the user-specific unit of volume and volume flow. The
corresponding time units (s, min, h, d) for volume flow are generated automatically.
User entry Max. 10 characters such as letters, numbers or special characters (@, %, /)
Factory setting User vol.
Additional information Result
The defined unit is shown as an option in the choose list of the following parameters:
• Volume flow unit parameter (→  55)
• Volume unit parameter (→  57)
Example
If the text GLAS is entered, the choose list of the Volume flow unit parameter (→  55)
shows the following options:
• GLAS/s
• GLAS/min
• GLAS/h
• GLAS/d