Endress+Hauser Proline Promag 300 - Correct.vol.flow; Flow Velocity; Conductivity

Description of device parameters Proline Promag 300 Modbus RS485
46 Endress+Hauser
Additional information Dependency
The unit is taken from the Mass flow unit parameter (→  58)
Correct.vol.flow
Navigation  Expert → Sensor → Measured val. → Process variab. → Correct.vol.flow (1851)
Description Displays the corrected volume flow currently measured.
User interface Signed floating-point number
Additional information Dependency
The unit is taken from the Cor.volflow unit parameter (→  60)
Flow velocity
Navigation  Expert → Sensor → Measured val. → Process variab. → Flow velocity (1854)
Description Displays the flow velocity currently calculated.
User interface Signed floating-point number
Conductivity
Navigation  Expert → Sensor → Measured val. → Process variab. → Conductivity (1850)
Description Displays the conductivity currently measured.
User interface Signed floating-point number
Additional information Dependency
The unit is taken from the Conductiv. unit parameter (→  57)