Endress+Hauser Proline Promag 300 - Filter Options

Proline Promag 300 Modbus RS485 Description of device parameters
Endress+Hauser 71
Cond. temp.coeff (1891)
→  75
Temp. damping (1886)
→  74
Ref.density (1885)
→  75
‣
Low flow cut off
→  76
‣
Empty pipe det.
→  79
‣
ECC
→  81
Filter options 
Navigation  Expert → Sensor → Process param. → Filter options (6710)
Description Use this function to select a filter option.
Selection • Adaptive
• Adaptive CIP on
• Dynamic
• Dynamic CIP on
• Binomial
• Binomial CIP on
Factory setting Binomial
Additional information Description
The user can choose from a range of filter combinations which can optimize the
measurement result depending on the application. Each change in the filter setting affects