Endress+Hauser Proline Promag 300 - Bootloader Rev.; Build No. Softw.; Mainboard Module Submenu; Software Rev.

Proline Promag 300 Modbus RS485 Description of device parameters
Endress+Hauser 185
3.8.5 "Mainboard module" submenu
Navigation  Expert → Diagnostics → Main elec.+I/O1
‣
Main elec.+I/O1
Software rev.
→  185
Build no. softw.
→  185
Bootloader rev.
→  185
Software rev.
Navigation  Expert → Diagnostics → Main elec.+I/O1 → Software rev. (0072)
Description Use this function to display the software revision of the module.
User interface Positive integer
Build no. softw.
Navigation  Expert → Diagnostics → Main elec.+I/O1 → Build no. softw. (0079)
Description Displays the software build number of the module.
User interface Positive integer
Bootloader rev.
Navigation  Expert → Diagnostics → Main elec.+I/O1 → Bootloader rev. (0073)
Description Displays the bootloader revision of the software.
User interface Positive integer