Endress+Hauser Proline Promag 300 - ENP Version; Ext. Order CD. 2; Ext. Order CD. 3

Description of device parameters Proline Promag 300 Modbus RS485
184 Endress+Hauser
Additional information Description
The extended order code indicates the version of all the features of the product structure
for the measuring device and thus uniquely identifies the measuring device.
The extended order code can also be found on the nameplate of the sensor and
transmitter in the "Ext. ord. cd." field.
Ext. order cd. 2 
Navigation  Expert → Diagnostics → Device info → Ext. order cd. 2 (0021)
Description Displays the second part of the extended order code.
User interface Character string
Additional information For additional information, see Ext. order cd. 1 parameter (→  183)
Ext. order cd. 3 
Navigation  Expert → Diagnostics → Device info → Ext. order cd. 3 (0022)
Description Displays the third part of the extended order code.
User interface Character string
Additional information For additional information, see Ext. order cd. 1 parameter (→  183)
ENP version
Navigation  Expert → Diagnostics → Device info → ENP version (0012)
Description Displays the version of the electronic nameplate.
User interface Character string
Factory setting 2.02.00
Additional information Description
This electronic nameplate stores a data record for device identification that includes more
data than the nameplates attached to the outside of the device.