Endress+Hauser Proline Promag 300 - Volume Unit; Conductiv. Unit

Proline Promag 300 Modbus RS485 Description of device parameters
Endress+Hauser 57
Volume unit 
Navigation  Expert → Sensor → System units → Volume unit (0563)
Description Use this function to select the unit for the volume.
Selection SI units
• cm³
• dm³
• m³
• ml
• l
• hl
• Ml Mega
US units
• af
• ft³
• fl oz (us)
• gal (us)
• kgal (us)
• Mgal (us)
• bbl (us;oil)
• bbl (us;liq.)
• bbl (us;beer)
• bbl (us;tank)
Imperial units
• gal (imp)
• Mgal (imp)
• bbl (imp;beer)
• bbl (imp;oil)
Factory setting Country-specific:
• m³
• gal (us)
Additional information Selection
For an explanation of the abbreviated units: →  217
Customer-specific units
The unit for the customer-specific volume is specified in the Volume text parameter
(→  63).
Conductiv. unit 
Navigation  Expert → Sensor → System units → Conductiv. unit (0582)
Prerequisite The On option is selected in the Conduct. measur. parameter (→  74) parameter.
Description Use this function to select the unit for the conductivity.
Selection SI units
• nS/cm
• µS/cm
• µS/m
• µS/mm
• mS/m
• mS/cm
• S/cm
• S/m
• kS/m
• MS/m
Factory setting µS/cm