Endress+Hauser Proline Promag 300 - Data Logging Submenu

Proline Promag 300 Modbus RS485 Description of device parameters
Endress+Hauser 191
Bootloader rev.
Navigation  Expert → Diagnostics → Display module → Bootloader rev. (0073)
Description Displays the bootloader revision of the software.
User interface Positive integer
3.8.11 "Data logging" submenu
Navigation  Expert → Diagnostics → Data logging
‣
Data logging
Assign chan. 1
→  192
Assign chan. 2
→  192
Assign chan. 3
→  193
Assign chan. 4
→  193
Logging interval
→  193
Clear logging
→  194
Data logging
→  194
Logging delay
→  195
Data log.control
→  195
Data log. status
→  196
Logging duration
→  196
‣
Displ.channel 1
→  196
‣
Displ.channel 2
→  197
‣
Displ.channel 3
→  198
‣
Displ.channel 4
→  198