Endress+Hauser Proline Promag 300 - Header; Header Text

Description of device parameters Proline Promag 300 Modbus RS485
26 Endress+Hauser
Header 
Navigation  Expert → System → Display → Header (0097)
Prerequisite A local display is provided.
Description Use this function to select the contents of the header of the local display.
Selection • Device tag
• Free text
Factory setting Device tag
Additional information Description
The header text only appears during normal operation.
1
XXXXXXXXX
A0029422
1 Position of the header text on the display
Selection
• Device tag
Is defined in the Device tag parameter (→  182).
• Free text
Is defined in the Header text parameter (→  26).
Header text 
Navigation  Expert → System → Display → Header text (0112)
Prerequisite In the Header parameter (→  26), the Free text option is selected.
Description Use this function to enter a customer-specific text for the header of the local display.
User entry Max. 12 characters such as letters, numbers or special characters (e.g. @, %, /)
Factory setting ------------
Additional information Description
The header text only appears during normal operation.