Endress+Hauser Proline Promag 300 - Install. Direct.; Integration Time; Measuring Period

Proline Promag 300 Modbus RS485 Description of device parameters
Endress+Hauser 89
Install. direct. 
Navigation  Expert → Sensor → Sensor adjustm. → Install. direct. (1809)
Description Use this function to change the sign of the medium flow direction.
Selection • In arrow direct.
• Against arrow
Factory setting In arrow direct.
Additional information Description
Before changing the sign: ascertain the actual direction of fluid flow with reference to
the direction indicated by the arrow on the sensor nameplate.
Integration time 
Navigation  Expert → Sensor → Sensor adjustm. → Integration time (6533)
Description Display the duration of an integration cycle.
User interface 1 to 65 ms
Measuring period 
Navigation  Expert → Sensor → Sensor adjustm. → Measuring period (6536)
Description Display the time of a full measuring period.
User interface 0 to 1 000 ms
"Variable adjust" submenu
Navigation  Expert → Sensor → Sensor adjustm. → Variable adjust
‣
Variable adjust
Vol. flow offset (1831)
→  90
Vol. flow factor (1832)
→  90
Mass flow offset (1841)
→  91