Endress+Hauser Proline Promag 300 - Modbus Data Map Submenu; Scan List Reg.0 to 15; Web Server Submenu

Description of device parameters Proline Promag 300 Modbus RS485
156 Endress+Hauser
3.6.3 "Modbus data map" submenu
Navigation  Expert → Communication → Modbus data map
‣
Modbus data map
Scan list reg.0 to 15 (7114)
→  156
Scan list reg.0 to 15 
Navigation  Expert → Communication → Modbus data map → Scan list reg.0 to 15 (7114)
Description Use this function to enter the scan list register. By entering the register address (1-based),
up to 16 device parameters can be grouped by assigning them to the scan list registers 0 to
15. The data of the device parameters assigned here are read out via the register addresses
5051 to 5081.
User entry 1 to 65 535
Factory setting 1
3.6.4 "Web server" submenu
Navigation  Expert → Communication → Web server
‣
Web server
Webserv.language (7221)
→  157
MAC Address (7214)
→  157
DHCP client (7212)
→  157
IP address (7209)
→  158
Subnet mask (7211)
→  158
Default gateway (7210)
→  158
Webserver funct. (7222)
→  159
Login page (7273)
→  159