Endress+Hauser Proline Promag 300 - Volume Flow; Mass Flow

Proline Promag 300 Modbus RS485 Description of device parameters
Endress+Hauser 45
‣
Input values
→  49
‣
Output values
→  51
"Process variables" submenu
Navigation  Expert → Sensor → Measured val. → Process variab.
‣
Process variab.
Volume flow (1838)
→  45
Mass flow (1847)
→  45
Correct.vol.flow (1851)
→  46
Flow velocity (1854)
→  46
Conductivity (1850)
→  46
CorrConductivity (1853)
→  47
Temperature (1852)
→  47
Density (1857)
→  47
Volume flow
Navigation  Expert → Sensor → Measured val. → Process variab. → Volume flow (1838)
Description Displays the volume flow that is currently measured.
User interface Signed floating-point number
Additional information
Mass flow
Navigation  Expert → Sensor → Measured val. → Process variab. → Mass flow (1847)
Description Displays the mass flow currently calculated.
User interface Signed floating-point number