Endress+Hauser Proline Promag 300 - Administration Submenu; Diagnostic No. 961; Diagnostic No. 962 (Pipe Empty)

Proline Promag 300 Modbus RS485 Description of device parameters
Endress+Hauser 39
Diagnostic no. 961 
Navigation  Expert → System → Diagn. handling → Diagn. behavior → Diagnostic no. 961 (0736)
Description Use this function to change the diagnostic behavior of the diagnostic message 861 Process
fluid.
Selection • Off
• Alarm
• Warning
• Logbook only
Factory setting Alarm
Additional information For a detailed description of the options available, see →  32
Diagnostic no. 962 (Pipe empty) 
Navigation  Expert → System → Diagn. handling → Diagn. behavior → Diagnostic no. 962 (0745)
Description Option for changing the diagnostic behavior of the diagnostic message 862 Pipe empty.
Selection • Off
• Alarm
• Warning
• Logbook only
Factory setting Warning
Additional information For a detailed description of the options available, see →  32
3.1.4 "Administration" submenu
Navigation  Expert → System → Administration
‣
Administration
‣
Def. access code
→  40
‣
Reset acc. code
→  41
Device reset (0000)
→  42