Endress+Hauser Proline Promag 300 - Corr. Vol. Unit

Proline Promag 300 Modbus RS485 Description of device parameters
Endress+Hauser 61
Selection SI units
• Nl/s
• Nl/min
• Nl/h
• Nl/d
• Nm³/s
• Nm³/min
• Nm³/h
• Nm³/d
• Sm³/s
• Sm³/min
• Sm³/h
• Sm³/d
US units
• Sft³/s
• Sft³/min
• Sft³/h
• Sft³/d
• Sgal/s (us)
• Sgal/min (us)
• Sgal/h (us)
• Sgal/d (us)
• Sbbl/s (us;liq.)
• Sbbl/min (us;liq.)
• Sbbl/h (us;liq.)
• Sbbl/d (us;liq.)
Imperial units
• Sgal/s (imp)
• Sgal/min (imp)
• Sgal/h (imp)
• Sgal/d (imp)
Factory setting Country-specific:
• Nl/h
• Sft³/h
Additional information Result
The selected unit applies for:
Correct.vol.flow parameter (→  46)
Selection
For an explanation of the abbreviated units: →  217
Customer-specific units
The unit for the customer-specific corrected volume is defined in the Corr. vol. text
parameter (→  65).
Corr. vol. unit 
Navigation  Expert → Sensor → System units → Corr. vol. unit (0575)
Description Use this function to select the unit for the corrected volume.
Selection SI units
• Nl
• Nm³
• Sm³
US units
• Sft³
• Sgal (us)
• Sbbl (us;liq.)
Imperial units
Sgal (imp)
Factory setting Country-specific:
• Nm³
• Sft³
Additional information Selection
For an explanation of the abbreviated units: →  217
Customer-specific units
The unit for the customer-specific corrected volume is defined in the Corr. vol. text
parameter (→  65).