Endress+Hauser Proline Promag 300 - Event Logbook Submenu

Proline Promag 300 Modbus RS485 Description of device parameters
Endress+Hauser 179
3.8.2 "Event logbook" submenu
Navigation  Expert → Diagnostics → Event logbook
‣
Event logbook
Filter options (0705)
→  179
‣
Event list
→  180
Filter options 
Navigation  Expert → Diagnostics → Event logbook → Filter options (0705)
Description Use this function to select the category whose event messages are displayed in the event
list of the local display.
Selection • All
• Failure (F)
• Funct. check (C)
• Out of spec. (S)
• Mainten. req.(M)
• Information (I)
Factory setting All
Additional information Description
The status signals are categorized in accordance with VDI/VDE 2650 and NAMUR
Recommendation NE 107:
• F = Failure
• C = Function Check
• S = Out of Specification
• M = Maintenance Required
Filter options 
Navigation  Expert → Diagnostics → Event logbook → Filter options
Description Use this function to select the category whose event messages are displayed in the event
list of the operating tool.
Selection • All
• Failure (F)
• Funct. check (C)
• Out of spec. (S)
• Mainten. req.(M)
• Information (I)