Endress+Hauser Proline Promag 300 - Output Curr. 1 to N

Proline Promag 300 Modbus RS485 Description of device parameters
Endress+Hauser 51
"Output values" submenu
Navigation  Expert → Sensor → Measured val. → Output values
‣
Output values
‣
Value curr.out 1 to n
→  51
‣
PFS output 1 to n
→  52
‣
Relay output 1 to n
→  53
‣
Double pulse out
→  54
"Value current output 1 to n" submenu
Navigation  Expert → Sensor → Measured val. → Output values → Value
curr.out 1 to n
‣
Value curr.out 1 to n
Output curr. 1 to n (0361–1 to n)
→  51
Measur. curr. 1 to n (0366–1 to n)
→  51
Output curr. 1 to n
Navigation  Expert → Sensor → Measured val. → Output values → Value curr.out 1 to n → Output
curr. 1 to n (0361–1 to n)
Description Displays the current value currently calculated for the current output.
User interface 0 to 22.5 mA
Measur. curr. 1 to n
Navigation  Expert → Sensor → Measured val. → Output values → Value curr.out 1 to n
→ Measur. curr. 1 to n (0366–1 to n)
Description Use this function to display the actual measured value of the output current.
User interface 0 to 30 mA