Endress+Hauser Proline Promag 300 - I;O 1 Terminals; I;O Module 1 Submenu; I;O Module 2 Submenu

Proline Promag 300 Modbus RS485 Description of device parameters
Endress+Hauser 187
3.8.7 "I/O module 1" submenu
Navigation  Expert → Diagnostics → I/O module 1
‣
I/O module
Software rev. (0072)
→  187
I/O 1 terminals
Navigation  Expert → Diagnostics → I/O module 1 → I/O 1 terminals (3902–1)
Description Displays the terminal numbers used by the I/O module.
User interface • Not used
• 26-27 (I/O 1)
• 24-25 (I/O 2)
• 22-23 (I/O 3)
Software rev.
Navigation  Expert → Diagnostics → I/O module 2 → Software rev. (0072)
 Expert → Diagnostics → I/O module 3 → Software rev. (0072)
 Expert → Diagnostics → I/O module 4 → Software rev. (0072)
Description Use this function to display the software revision of the module.
User interface Positive integer
3.8.8 "I/O module 2" submenu
Navigation  Expert → Diagnostics → I/O module 2
‣
I/O module 2
I/O 2 terminals
→  188
Software rev.
→  188
Build no. softw.
→  188
Bootloader rev.
→  188