Endress+Hauser Proline Promag 300 - Page 188

Description of device parameters Proline Promag 300 Modbus RS485
188 Endress+Hauser
I/O 1 terminals
Navigation  Expert → Diagnostics → I/O module 1 → I/O 1 terminals (3902–1)
Description Displays the terminal numbers used by the I/O module.
User interface • Not used
• 26-27 (I/O 1)
• 24-25 (I/O 2)
• 22-23 (I/O 3)
Software rev.
Navigation  Expert → Diagnostics → I/O module 2 → Software rev. (0072)
Description Use this function to display the software revision of the module.
User interface Positive integer
Build no. softw.
Navigation  Expert → Diagnostics → I/O module 2 → Build no. softw. (0079)
Description Displays the software build number of the module.
User interface Positive integer
Bootloader rev.
Navigation  Expert → Diagnostics → I/O module 2 → Bootloader rev. (0073)
Description Displays the bootloader revision of the software.
User interface Positive integer