Endress+Hauser Proline Promag 300 - Double Pulse Output Submenu; Master Term. No.; Slave Term. No.

Proline Promag 300 Modbus RS485 Description of device parameters
Endress+Hauser 145
3.5.4 "Double pulse output" submenu
Navigation  Expert → Output → Double pulse out
‣
Double pulse out
Master term. no. (0981)
→  145
Slave term. no. (0990)
→  145
Signal mode (0991)
→  146
Assign pulse 1 (0982–1)
→  146
Value per pulse (0983)
→  146
Pulse width (0986)
→  147
Phase shift (0992)
→  147
Measuring mode (0984)
→  147
Failure mode (0985)
→  148
Pulse output (0987)
→  149
Invert outp.sig. (0993)
→  149
Master term. no.
Navigation  Expert → Output → Double pulse out → Master term. no. (0981)
Description Displays the master terminal number for the double pulse output.
User interface • Not used
• 24-25 (I/O 2)
• 22-23 (I/O 3)
Additional information "Not used" option
The double pulse output does not use any terminal numbers.
Slave term. no.
Navigation  Expert → Output → Double pulse out → Slave term. no. (0990)
Description Displays the slave terminal number for the double pulse output.