Endress+Hauser Proline Promag 300 - Default Gateway; IP Address; Subnet Mask

Description of device parameters Proline Promag 300 Modbus RS485
158 Endress+Hauser
Selection • Off
• On
Factory setting Off
Additional information Result
If the DHCP client functionality of the Web server is activated, the IP address (→  158),
Subnet mask (→  158) and Default gateway (→  158) are set automatically.
Identification is via the MAC address of the measuring device.
IP address 
Navigation  Expert → Communication → Web server → IP address (7209)
Description Displays the IP address of the device's web server.
User entry 4 octet: 0 to 255 (in the particular octet)
Factory setting 192.168.1.212
Subnet mask 
Navigation  Expert → Communication → Web server → Subnet mask (7211)
Description Displays the subnet mask.
User entry 4 octet: 0 to 255 (in the particular octet)
Factory setting 255.255.255.0
Default gateway 
Navigation  Expert → Communication → Web server → Default gateway (7210)
Description Displays the default gateway.
User entry 4 octet: 0 to 255 (in the particular octet)
Factory setting 0.0.0.0