Endress+Hauser Proline Promag 300 - Page 236

Modbus RS485 Register Information Proline Promag 300 Modbus RS485
236 Endress+Hauser
Navigation: Expert → System → Diagn. handling → Diagn. behavior
Parameter Register Data type Access Selection / User entry / User interface → 
Diagnostic no. 444 (0740) 5120 Integer Read / Write 0 = Off
1 = Logbook only
2 = Warning
3 = Alarm
35
Diagnostic no. 543 (0643) 2362 Integer Read / Write 0 = Off
1 = Logbook only
2 = Warning
3 = Alarm
36
Diagnostic no. 832 (0681) 2759 Integer Read / Write 0 = Off
1 = Logbook only
2 = Warning
3 = Alarm
37
Diagnostic no. 833 (0682) 2762 Integer Read / Write 0 = Off
1 = Logbook only
2 = Warning
3 = Alarm
37
Diagnostic no. 834 (0700) 2761 Integer Read / Write 0 = Off
1 = Logbook only
2 = Warning
3 = Alarm
37
Diagnostic no. 835 (0702) 2760 Integer Read / Write 0 = Off
1 = Logbook only
2 = Warning
3 = Alarm
38
Diagnostic no. 862 (0745) 2097 Integer Read / Write 0 = Off
1 = Logbook only
2 = Warning
3 = Alarm
39
Diagnostic no. 937 (0743) 2396 Integer Read / Write 0 = Off
1 = Logbook only
2 = Warning
3 = Alarm
38
"Administration" submenu
Navigation: Expert → System → Administration
Parameter Register Data type Access Selection / User entry / User interface → 
Device reset (0000) 6817 Integer Read / Write 0 = Cancel
1 = Restart device
2 = To delivery set.
5 = Del. p.fail data
21 = Delete T-DAT
22 = Res.fault.param.
23 = Del. deliv.sett.
24 = Delete HistoROM
25 = Rest.S-DATBackup
42
Activate SW opt. (0029) 2795 Integer Read / Write Max. 10-digit string consisting of
numbers.
42
SW option overv. (0015) 2902 Integer Read 1 = Extend. HistoROM
32 = ECC
128 = Custody transfer
16384 = HBT Monitoring
32768 = HBT Verification
43