Endress+Hauser Proline Promag 50P - Page 31

Proline Promag 50P, 53P
Endress+Hauser 31
Ground disk 1/2" to 12" (DN 15 to 300)
A0003221
DN
1)
di B D H
EN (DIN) / JIS /
AS
4)
[mm]
ANSI
[inch]
inches
(mm)
inches
(mm)
inches
(mm)]
inches
(mm)
15 1/2" 0.63 (16) 1.69 (43) 2.42 (61.5) 2.87 (73)
25 1" 1.02 (26) 2.44 (62) 3.05 (77.5) 3.44 (87.5)
32 − 35 80 87.5 94.5
40 1 1/2" 1.61 (41) 3.23 (82) 3.98 (101) 4.06 (103)
50 2" 2.05 (52) 3.98 (101) 4.55 (115.5) 4.25 (108)
65 − 68 121 131.5 118
80 3" 3.15 (80) 5.16 (131) 6.08 (154.5) 5.31 (135)
100 4" 4.09 (104) 6.14 (156) 7.34 (186.5) 6.02 (153)
125 − 130 187 206.5 160
150 6" 6.22 (158) 8.54 (217) 10.1 (256) 7.24 (184)
200 8" 8.11 (206) 10.5 (267) 11.3 (288) 8.07 (205)
250 10" 10.2 (260) 12.9 (328) 14.1 (359) 9.45 (240)
300
2)
12"
2)
12.3 (312) 14.8 (375) 16.3 (413) 10.7 (273)
300
3)
12"
3)
12.2 (310) 14.8 (375) 15.9 (404) 10.6 (268)
1)
Ground disks can, with the exception of 12" (DN 300), be used for all flange norms / pressure ratings.
2)
PN 10/16, Class 150
3)
PN 25, JIS 10K/20K
4)
Only DN 25 and 50 are available if flanges according to AS are used.
0.59”
(15)
0.39”
(10)
H
ØB
Ødi
ØD
Ø 0.26”
(6.5)
0.08”
(2)