A0029320
7 Engineering unit in m(ft)
For detailed information on replacing the cable gland on the connection housing, see the
Transmitter Brief Operating Instructions.
Promag W 400, W 500
Permanent immersion in water
A fully welded remote version with IP68 protection is optionally available for permanent
immersion in water ≤ 3 m (10 ft) or in exceptional cases for use for up to 48 hours at ≤
10 m (30 ft). The measuring device meets the requirements of corrosion categories C5-M and
Im1/Im2/Im3. The fully welded design along with the connection compartment sealing
system ensure that moisture cannot enter the measuring device.
A0029320
8 Engineering unit in m(ft)
For detailed information on replacing the cable gland on the connection housing, see the
Transmitter Brief Operating Instructions.
To Next Page
Loading...
