Proline Prowirl 73 F, W
14 Endress+Hauser
Pressure-temperature curve according to ANSI B16.5 and JIS, stainless steel
ANSI B 16.5:
Class 150...300 → Prowirl 73 W und 73 F
Class 600 → Prowirl 73 F (in preparation)
JIS B2238
10...20 K → Prowirl 73 W und 73 F
40 K → Prowirl 73 F (in preparation)
F06-7xxxxxxx-05-xx-xx-xx-001
Pressure loss The pressure loss can be determined with the aid of the Applicator, a software for selection and sizing of
flowmeters. The software is available both via Internet (www.applicator.com) and on a CD-ROM for local
PC installation.
Mechanical construction
Design, dimensions Dimensions of transmitter, remote version
F06-72xxxxxx-06-03-00-xx-000
* The following dimensions differ depending on the version:
– The dimension 232 mm changes to 226 mm in the blind version (without local operation).
– The dimension 150 mm changes to 163 mm in the Ex d version.
– The dimension 345 mm changes to 368 mm in the Ex d version.
-200 -100
0
20
40
60
80
100
120
0 100 200 300 400
°C
bar
Class 150...600
Cl. 150
Cl. 300
Cl. 600
-200 -100
0
5
10
15
20
25
30
35
40
45
0 100 200 300 400
°C
bar
10...40 K
40 K
20 K
10 K
123
133
195
150 (163)*
345 (368)*
100
100
25
Ø 8.6 (M8)
232 (226)*
Esc
E
-
+
To Next Page
Loading...
