EasyManuals Logo

Endress+Hauser Proline Prowirl 73 Brief Operating Instructions

Endress+Hauser Proline Prowirl 73
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
KA00031D/06/EN/14.11
71154544
Brief Operating Instructions
Proline Prowirl 73
Vortex Flow Measuring System
These Brief Operating Instructions are not intended to replace the
Operating Instructions provided in the scope of supply. Detailed
information is provided in the Operating Instructions and the
additional documentation on the CD-ROM supplied.
Depending on the device version, the complete device
documentation consists of:
Brief Operating Instructions (this document)
Operating Instructions
Description of Device Functions
Approvals and safety certificates
Safety instructions in accordance with the approvals for the device
(e.g. explosion protection, pressure equipment directive, etc.)
Additional device-specific information

Other manuals for Endress+Hauser Proline Prowirl 73

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Endress+Hauser Proline Prowirl 73 and is the answer not in the manual?

Endress+Hauser Proline Prowirl 73 Specifications

General IconGeneral
Device TypeVortex flowmeter
CommunicationHART, PROFIBUS PA, FOUNDATION Fieldbus
Measurement PrincipleVortex shedding
Process Temperature-200°C to +400°C
Output4 to 20 mA, pulse, frequency
ApprovalsATEX, IECEx
Housing MaterialStainless steel
Protection ClassIP67
Ambient Temperature Range-40°C to +80°C
MediumLiquids, gases, steam
LiningNot applicable
Nominal DiameterDN15 to DN300

Related product manuals