To Next PageTo Next Page
Need help?Do you have a question about the Endress+Hauser Promass 300 and is the answer not in the manual?
General| Measuring Principle | Coriolis |
|---|---|
| Pressure Range | Up to 100 bar |
| Measured Variables | Mass flow, density, temperature |
| Output Signal | 4-20 mA, pulse, frequency |
| Max. Process Pressure | 100 bar |
| Ingress Protection | IP66/67 |
| Process Pressure Range | Up to 100 bar |
| Output Signals | 4-20 mA, pulse, frequency |
| Protection Class | IP66/67 |
| Accuracy | ±0.1% of rate |
| Communication Protocols | HART, PROFIBUS PA, FOUNDATION Fieldbus |
| Display | 4-line backlit display |
| Power Supply | 24 V DC |
| Device Type | Mass Flow Meter |
| Process Connection | Flange, threaded, hygienic fittings |
| Lining | Not applicable |
| Sensor Material | Stainless steel |
| Electronics Housing Material | Aluminum, stainless steel |
| Ambient Temperature | -40 to +60 °C |
| Process Temperature | -50°C to +150°C |
| Repeatability | ±0.05% o.r. |
| Process Temperature Range | -50 to +150 °C (-58 to +302 °F) |
| Housing Material | Aluminum, Stainless steel |
| Certifications | ATEX, IECEx, NEPSI |
| Temperature Range | -50°C to +150°C |
