Need help?Do you have a question about the Endress+Hauser Proline Promass I 300 and is the answer not in the manual?
General| Device Type | Coriolis mass flowmeter |
|---|---|
| Measuring Principle | Coriolis |
| Accuracy | ±0.1% of rate |
| Process Pressure | Up to 100 bar |
| Output Signal | 4 to 20 mA |
| Power Supply | 24 V DC |
| Housing Material | Stainless steel |
| Approvals/Certifications | ATEX, IECEx, FM |
| Protection Class | IP67 |
| Material | Stainless steel |
| Process Temperature | -50°C to +200°C |
Defines symbols used throughout the manual for clarity and safety.
Outlines necessary qualifications and authorizations for personnel working with the device.
Specifies the intended application and media for the measuring device.
Details security functions to protect the device and its configuration from unauthorized access.
Explains how a hardware switch disables write access to device parameters.
Describes how to use passwords to secure device parameters and WLAN access.
Describes the physical components and overall structure of the measuring device.
Explains methods for identifying the device, including nameplates and order codes.
Details the information found on the transmitter's identification nameplate.
Details the information found on the sensor's identification nameplate.
Provides guidelines for proper storage to maintain device integrity and prevent damage.
Details the procedure for safely moving the device to its installation point.
Specifies environmental and positional requirements for correct device installation.
Details the procedure and necessary tools for physically installing the measuring device.
Outlines the essential checks to perform after the device has been installed.
Outlines requirements for cables, tools, and electrical safety during connection.
Provides step-by-step instructions for connecting the device to power and network interfaces.
Explains the importance and procedure for potential equalization for measurement accuracy.
Covers device configuration settings like naming and IP address activation.
Describes how to navigate and operate the device using its onboard display and controls.
Details how to operate and configure the device remotely using a web browser interface.
Explains how to operate the device using external software tools like FieldCare.
Explains the purpose and format of the GSD file for PROFINET system integration.
Details how the device exchanges data cyclically with an automation system.
Outlines the essential checks required before putting the device into operation.
Guides users through the setup menu for configuring device parameters for operation.
Covers advanced configuration options including security, sensor adjustment, and display settings.
Explains methods like access codes and write protection switches to secure device configuration.
Explains how to access and view the current process measurements displayed by the device.
Details how to adjust device settings for optimal performance under specific process conditions.
Provides instructions for resetting the device's totalizer values to zero or a preset value.
Offers solutions for common issues encountered with the local display and output signals.
Explains how diagnostic messages and status signals are presented on the device's local screen.
Guides users on how to access specific instructions for resolving diagnostic events.
Provides options for resetting the device configuration to factory or delivery settings.
Outlines routine maintenance procedures, including cleaning and checks.
Provides critical guidelines and requirements for performing device repairs and modifications.
Lists and describes accessories specifically designed for the transmitter and sensor components.
Details accessories that enable communication, such as field gateways and tablet PCs.
Lists available measured variables and specifies input signal types and ranges.
Details the specifications for the device's various output signals, including current, pulse, and switch outputs.
Provides detailed specifications for the device's power supply options, including terminal voltage and consumption.
Outlines key performance metrics like accuracy, repeatability, and temperature effects.
Details process-related technical data, including medium temperature and pressure-temperature ratings.
Describes optional software packages that enhance device functionality for specific applications.
To Next Page