Endress+Hauser Proline Promass I 300 - Output Values

Operation Proline Promass I 300 PROFINET
146 Endress+Hauser
Parameter overview with brief description
Parameter Description User interface
Measured values 1 to n Displays the current input value. Signed floating-point number
Measured current 1 to n Displays the current value of the current input. 0 to 22.5 mA
Input values of status input
The Status input 1 to n submenu contains all the parameters needed to display the
current measured values for every status input.
Navigation
"Diagnostics" menu → Measured values → Input values → Status input 1 to n
‣
Status input 1 to n
Value status input
→  146
Parameter overview with brief description
Parameter Description User interface
Value status input Shows the current input signal level. • High
• Low
11.4.4 Output values
The Output values submenu contains all the parameters needed to display the current
measured values for every output.
Navigation
"Diagnostics" menu → Measured values → Output values
‣
Output values
‣
Current output 1 to n
→  146
‣
Pulse/frequency/switch output
1 to n
→  147
‣
Relay output 1 to n
→  147
Output values of current output
The Value current output submenu contains all the parameters needed to display the
current measured values for every current output.