Endress+Hauser Proline Promass I 300 - Totalizer

Operation Proline Promass I 300 PROFINET
144 Endress+Hauser
Parameter Prerequisite Description User interface
Concentration For the following order code:
Order code for "Application package",
option ED "Concentration"

The software options currently
enabled are displayed in the
Software option overview
parameter.
Displays the concentration that is
currently calculated.
Dependency
The unit is taken from the
Concentration unit parameter.
Signed floating-point
number
Target mass flow With the following conditions:
Order code for "Application package",
option ED "Concentration"

The software options currently
enabled are displayed in the
Software option overview
parameter.
Displays the mass flow that is currently
measured for the target medium.
Dependency
The unit is taken from the Mass flow
unit parameter (→  94).
Signed floating-point
number
Carrier mass flow With the following conditions:
Order code for "Application package",
option ED "Concentration"

The software options currently
enabled are displayed in the
Software option overview
parameter.
Displays the mass flow that is currently
measured for the carrier medium.
Dependency
The unit is taken from the Mass flow
unit parameter (→  94).
Signed floating-point
number
11.4.2 Totalizer
The Totalizer submenu contains all the parameters needed to display the current
measured values for every totalizer.
Navigation
"Diagnostics" menu → Measured values → Totalizer 1 to n
‣
Totalizer 1 to n
Assign process variable
→  145
Totalizer value 1 to n
→  145
Totalizer status 1 to n
→  145
Totalizer status (Hex) 1 to n
→  145