Endress+Hauser Proline Promass I 300 - Page 94

Commissioning Proline Promass I 300 PROFINET
94 Endress+Hauser
Corrected volume unit
→  94
Density unit
→  94
Reference density unit
→  94
Temperature unit
→  95
Pressure unit
→  95
Parameter overview with brief description
Parameter Description Selection Factory setting
Mass flow unit Select mass flow unit.
Result
The selected unit applies for:
• Output
• Low flow cut off
• Simulation process variable
Unit choose list Country-specific:
• kg/h
• lb/min
Mass unit Select mass unit. Unit choose list Country-specific:
• kg
• lb
Volume flow unit Select volume flow unit.
Result
The selected unit applies for:
• Output
• Low flow cut off
• Simulation process variable
Unit choose list Country-specific:
• l/h
• gal/min (us)
Volume unit Select volume unit. Unit choose list Country-specific:
• l (DN > 150 (6"): m³ option)
• gal (us)
Corrected volume flow unit Select corrected volume flow unit.
Result
The selected unit applies for:
Corrected volume flow parameter
(→  143)
Unit choose list Country-specific:
• Nl/h
• Sft³/min
Corrected volume unit Select corrected volume unit. Unit choose list Country-specific:
• Nl
• Sft³
Density unit Select density unit.
Result
The selected unit applies for:
• Output
• Simulation process variable
• Density adjustment (Expert menu)
Unit choose list Country-specific:
• kg/l
• lb/ft³
Reference density unit Select reference density unit. Unit choose list Country-dependent
• kg/Nl
• lb/Sft³