Endress+Hauser Proline Promass I 300 - System integration

Proline Promass I 300 PROFINET System integration
Endress+Hauser 75
9 System integration
9.1 Overview of device description files
9.1.1 Current version data for the device
Firmware version 01.01.zz • On the title page of the Operating instructions
• On the transmitter nameplate
• Firmware version
Diagnostics → Device information → Firmware
version
Release date of firmware version 07.2019 –
Manufacturer ID 0x11 Manufacturer ID
Diagnostics → Device information → Manufacturer ID
Device ID 0x843B Device ID
Expert → Communication → PROFINET configuration
→ PROFINET information → Device ID
Device type ID Promass 300 Device Type
Expert → Communication → PROFINET configuration
→ PROFINET information → Device Type
Device revision 2 Device revision
Expert → Communication → PROFINET configuration
→ PROFINET information → Device revision
PROFINET version 2.3.x –
For an overview of the different firmware versions for the device →  222
9.1.2 Operating tools
The suitable device description file for the individual operating tools is listed in the table
below, along with information on where the file can be acquired.
Operating tool via
Service interface (CDI)
Sources for obtaining device descriptions
FieldCare • www.endress.com → Download Area
• CD–ROM (contact Endress+Hauser)
• DVD (contact Endress+Hauser)
DeviceCare • www.endress.com → Download Area
• CD–ROM (contact Endress+Hauser)
• DVD (contact Endress+Hauser)