Digital field display 6 Operation
39
6.3 Setting-up using the operating menu
ƒig. 8: Setting up using the operating menu
Enter the operating menu.
Select the operating function required.
Parameter entry in editor mode
(enter/select data using + or - and acknowledge using E).
Return from editor mode or operating function to a function
group. A return to the home position (display mode) can be
made by simultaneous operation of the +/- push buttons a
number of times. Before returning, a question is asked if the
set-up data is to be saved.
Direct return to the home position (display mode). Before
returning, a question is asked if the set-up data is to be
saved.
Question whether the data is to be saved (selection YES/NO
with + or - push button and acknowledge with E).
6.3.1 Operating menu overview
G-09-RIA261ZZ-19-00-00-en-001.eps
%
%%
% !$
!$!$
!$
$()
$()$()
$() $
$$
$
Decimal point Display value
0%
Display value
100%
Offset User code
To Next Page
Loading...
