Endress+Hauser RIA 261 - 6.4 Parameter overview

6 Operation Digital field display
40
6.4 Parameter overview
Parameter Setting up
selections
Default settings Actual settings
Decimal point
%
Selecting the
decimal point of
the numeric
display
Selection range:
0 to 4 decimal
points

Display value 0%
!$
Display value of
the 4 mA current
signal
Values:
-19999 to 99999

Display value
100%

Display value of
the 20 mA current
signal
Values:
-19999 to 99999

Offset
$()
Signal offset for
matching to the
measured value
display
Values:
-19999 to 32767

User code
$
Freely settable
user code.
A user
code that is already
entered can only be
changed if the old
unlock code is
entered.Then the new
code can be set up.
Values:
0000 to 9999
!
There is no active
user code on "0"
