To Next PageTo Next Page
Need help?Do you have a question about the Endress+Hauser tmt142 and is the answer not in the manual?
General| Device Type | Temperature Transmitter |
|---|---|
| Ambient Temperature Limit | -40 to +85 °C |
| Input | RTD, Thermocouple |
| Output Signal | 4 to 20 mA |
| Operating Temperature | -40 to +85 °C (-40 to +185°F) |
| Housing Material | Aluminum die-cast |
| Protection Class | IP66 / IP67 |
| Communication Protocol | HART |
| Mounting | DIN rail |
| Certifications | ATEX, IECEx |
Specifies the intended application and limitations for the device.
Guidelines for safe installation, setup, and ongoing operation of the device.
Ensures safe use of the device, including considerations for hazardous areas.
Explains safety symbols and warnings used throughout the documentation.
Provides a step-by-step overview for installing the device quickly.
Details environmental and physical requirements for device installation.
Detailed procedures for mounting the device on walls or pipes.
Final checks to ensure correct installation and device compliance.
Step-by-step guide for connecting the device wiring.
Details electrical terminal connections for different sensor types.
Instructions for grounding and HART® communication connections.
Guidelines for proper cable shielding and electrical potential alignment.
Final checks after electrical installation to ensure correct connections.
Ensures correct device mounting and electrical connection before operation.
Procedure for powering up the device and its readiness for operation.
Explanation of the display interface and its symbols.
Details on hardware setup using jumpers for configuration and security.
