COMPONENT MAINTENANCE MANUAL
BA27
24-01-01
This document contains Data controlled by the U.S. Export Administration Regulations. Diversion or use contrary to U.S. law is prohibited
UCHECK
1. UGeneral
J. UDate of installation on aircraftU.
Find the date that the battery was installed on the aircraft. If the date of
installation was 3.2 years ago or more, do the test given in paragraph I: "Battery
shop test upon removal from aircraft".
K. UBattery case and lidU. Examine for:
1) Cleanliness
(2) Cracking
(3) Corrosion
(4) Damage to rivet holes (holes must not be greater than Ø 0.132”)
C. URubber components:U Examine for the following defects:
(1) Signs of perishing
(2) Deterioration
D. UAll other components.
(1) Renew if damaged or showing signs of deterioration.
Page 23/24
May 14/13
To Next Page
Loading...
Need help?
General
