COMPONENT MAINTENANCE MANUAL
BA27
24-01-01
This document contains Data controlled by the U.S. Export Administration Regulations. Diversion or use contrary to U.S. law is prohibited
UTESTING AND FAULT ISOLATION
1.
UGeneral
This section contains battery functional tests and fault isolation information. Trouble
shooting is presented in chart form (Ref. Fig.8).
2. URequired Test Equipment (Ref. Fig. 4)U.
UNOTE:U Test equipment having equivalent specifications can be used.
NOMENCLATUR
MFR MODEL/PN APPLICATION
DC Power Suppl
, Mead Testin
/F1
re
ulated, 40V dc
@ 10A minimum with
Blocking Diode on Power
Suppl
or Anal
se
.
this can be replaced b
the followin
Char
er/Anal
ser
Mead Char
er/ Anal
se
Testin
/F1
DC Fluke Fluke 85 Testin
/F1
Voltmeter, precision
(0.5%) 0 to 50V
Dischar
e unit Di
atron RCT 50-24 Testin
/F1
Capable of 5,10 & 30
mp dischar
e.
Required Test Equipment
Figure 4
Page 7
Mar 13/17