COMPONENT MAINTENANCE MANUAL
BA27
24-01-01
This document contains Data controlled by the U.S. Export Administration Regulations. Diversion or use contrary to U.S. law is prohibited
UASSEMBLY
1. UGeneral
This section describes and provides information for an experienced shop mechanic
to assemble batteries with no specialised training.
2. USafety
Same as disassembly.
UWARNINGU: Caution shall be exercised when testing, building and handling
batteries, as monoblocs are fully charged and any short circuit
condition may result in injury.
UWARNINGU: To avoid risk of injury, care shall be taken when wearing jewellery
such as rings, bracelets, metal watchstraps necklaces and belt
buckles.
UCAUTIONU: Any such items shall if possible, be removed prior to working on
monoblocs or batteries to avoid risk of injury.
UCAUTIONU: All tools coming into contact with the monobloc terminals shall be
fully insulated to prevent the risk of a short circuit condition.
UNOTEU: The ( ) part identification numbers herein are IPL, Figure 1 item
numbers.
Page 27
June 09/06
To Next Page
Loading...
Need help?
General
