COMPONENT MAINTENANCE MANUAL
BA27
24-01-01
This document contains Data controlled by the U.S. Export Administration Regulations. Diversion or use contrary to U.S. law is prohibited
UCLEANING
1. UGeneral
A. The following item is required to perform the cleaning procedure.
Soft clean dry cloth
2. UDisassembled Battery
A. Ensure that no particles from the drilled rivets remain in the case.
B. Wipe the inside of the case and underside of lid with soft clean dry cloth to
remove dust or dirt particles.
Page 21/22
June 09/06
To Next Page
Loading...
