COMPONENT MAINTENANCE MANUAL
BA27
24-01-01
This document contains Data controlled by the U.S. Export Administration Regulations. Diversion or use contrary to U.S. law is prohibited
UDISASSEMBLY
1. UGeneral
This section describes and provides the information necessary for an experienced
shop mechanic to re-block batteries with no specialised training. The batteries can
be reblocked a maximum of two times.
2. USafety
UWARNINGU: Caution shall be exercised when testing, building and handling
batteries, as monoblocs are fully charged and any short circuit
condition may result in injury.
UWARNINGU: To avoid risk of injury, care shall be taken when wearing jewellery
such as rings, bracelets, metal watchstraps, necklaces and belt
buckles.
UCAUTIONU: Any such items shall if possible, be removed prior to working on
monoblocs or batteries to avoid risk of injury.
UCAUTIONU: All tools coming into contact with the monobloc terminals shall be
fully insulated to prevent the risk of a short circuit condition.
Page 19
May 14/13