EnerSys NexSys+ NIP3 User Manual

NexSys
®
+
Owner’s Manual
AM-NXSPLUS-OM
Rev AC October 2018
18
Memo
Description
Memo
Description
U start
Battery voltage at start of
charge (Vpc)
SoC
Start of charge date and
time
U end
Battery voltage at end of
charge (Vpc)
DBa
Battery disconnect date
and time
Warning
Wi-iQ
®
device warnings
CFC
Termination code
(for service tech)
STATUS
This menu displays the status of the charger’s internal counters (number of normal and partial
charges, fault code, etc.).
Status Screen
Status
Description
Charge
Total number of charges - corresponds to the total of normally
terminated charges and charges terminated with or by faults
Complete
Number of charges normally terminated
Partial
Number of charges terminated abnormally
TH
Number of charger temperature faults
DF1 etc.
Number of faults recorded by the charger (see Fault Codes)

EnerSys NexSys+ NIP3 Specifications

General

Brand	EnerSys
Model	NexSys+ NIP3
Category	Battery Charger
Language	English