NOTE: When an Equalize charge is manually started, the output current will be set
to the value saved in the charger configuration.
2. The start of the equalization charge is indicated by the symbol . During the
equalization charge, the charger displays the output current and alternates, the battery
voltage and voltage per cell and remaining time.
L2010 24-36-48V US11
3. The battery will be available when the green LED comes back on and the display shows
AVAIL.
4. The battery is now ready for use. If the battery remains plugged in and refresh charge
has been enabled, refreshes will occur to maintain an optimal charge. Push the ON/OFF
button before unplugging the battery.
Automatic Equalization Start
If an equalization day has been programmed in Charger configurations the equalization charge
will start automatically on the programmed day of the week after charging is complete.
The battery will be available when the green LED comes back on and the display shows AVAIL.
The battery is now ready for use. If the battery remains plugged in and refresh charge has been
enabled, refreshes will occur to maintain an optimal charge. Push the ON/OFF button before
unplugging the battery.
To Next Page
Loading...
Need help?
General
