4
READ ME FIRST
This manual is intended for the user of Enervent
ventilation unit and eWind control panel.
Setting up the system
The ventilation system should already be installed and
ready to use when you read this.
CAUTION
CAUTION: Do not try to run the setup yourself.
The ventilation system installation must be
carried out by a professional system installer.
ilmastointilaite
ventilation unit
TYYPPI/TYPE:
SRJ.NRO/SERIAL NO:
W / V / HZ / A:
ENSTO ENERVENT OY
KIPINÄTIE 1 06150 PORVOO
TEL +358 (0) 207 528800 FAX +358 (0) 207 528844
INTENDED USE
The purpose of this unit is to improve the quality of
indoor air. Ventilation is the primary function of the
unit.
The unit is also used for recovering heat energy from
extracted air. Depending on the model, it can be used
for cooling supply air during summertime. It can also be
used for controlling the humidity and carbon dioxide
levels of indoor air.
OPERATION
Well-functioning ventilation creates the foundation for
comfortable living. Mechanical ventilation means that
fresh outside air is distributed into the building, and
used air is blown out. The purpose of ventilation is to
bring clean, ltered air for people and pets inside the
house, and to remove accumulated impurities from the
air.
Heat energy is recovered from the extracted air by the
rotating heat exchanger. The aluminium foils collect
heat from the extract air, and when they rotate to the
supply-air ow, they release the energy.
To Next Page
Loading...
