To Next Page
B
Benjamin DavisAug 11, 2025
What to do if my Enfinity Inverter has Grid Faults?
- JJohn BanksAug 11, 2025
If your Enfinity Inverter shows a Grid Fault, first wait for one minute to see if the grid returns to normal. Ensure the grid voltage and frequency meet required standards. Check the grid connection, including wires and interfaces. Verify grid usability. Also, check if the panel’s open-circuit voltage is similar to or exceeds the maximum DC voltage. If DC injection is higher than the set value, wait one minute. Try disconnecting and reconnecting the PV (+) and PV (-) with the DC input.
General