Enfinity 1000TL - 11 Decommissioning; Dismantling the Inverter; Packaging; Storage

37
11 Decommissioning
11.1 Dismantling the inverter
• DisconnecttheinverterfromDCInputandACoutput.
• Removeallconnectioncablesfromtheinverter.
• Removetheinverterfromthebracket.
11.2 Packaging
If possible, please pack the inverter with the original packaging. If it is no longer available, you can also
use an equivalent carton that meets the following requirements.
• Suitableforloadsmorethan25kg.
• Withhandle.
• Canbefullyclosed.
11.3 Storage
Store the inverter in dry place where ambient temperatures are always between -20 °C - +60 °C.
11.4 Disposal
Please be sure to take waste inverters and packing materials to an appropriate site for safe disposal
or recycling.