Enfinity 1000TL - Explanation of Symbols

6
!
CAUTION!
Possibledamagetohealthasaresultoftheeectsofradiation!
• Donotstaycloserthan20cmtotheinverterforanylengthoftime.
NOTE:
GroundingthePVgenerator.
Comply with the local requirements for grounding the PV modules and the PV
generator. Enfinity recommends connecting the generator frame and other
electrically conductive surfaces in a manner which ensures continuous conduction
and ground these in order to have optimal protection of the system and personnel.
2.3 Explanation of symbols
This section gives an explanation of all the symbols shown on the inverter and on the type label.
•Symbolsontheinverter
Symbol Explanation
Danger to life due to high voltages in the inverter!
There is residual voltage in the inverter. The inverter requires 5
minutes to discharge.
• Wait 5 minutes before you open the upper lid or the DC lid.
•Symbolsontheproductlabel
Symbol Explanation
CEmark.
The inverter complies with the requirements of the applicable
CE guidelines.
Bewareofhotsurface.
The inverter can become hot during operation. Avoid contact
during operation.
Dangerofhighvoltages.
Danger to life due to high voltages in the inverter!